Using Cricut Explore with Sabor Papel Collections

Hola and welcome back to Tips and Techniques Tuesday!  Sabor Papel has so many supportive followers and talented artistic  customers.  Last week, one of  Sabor's Facebook followers requested more project blog posts that use cutting machines.  Thank you so much Teresa Sanchez for your feedback and this post is for you!!

 I love my Cricut Explore cutting machine for so many reasons, but especially because Sabor Papel's 80 lb card stock cuts so beautifully in this incredible machine.  I do subscribe to CricutAccess on Cricut Design Space and that makes creating a breeze because I have access to so many beautiful designs to use.  Today, I want to share with you my tips and techniques when I am creating a project with my Cricut Explore and Sabor Papel's beautiful paper collections.

 Supplies Used:

Sabor Papel Amor Card Stock called Ramitos

Plain Card Stock in light purple color tone

Amor Card Stock Cutouts

removable scotch tape to hold the paper in place on the circuit mat

purple powder ink

bone folder

liquid glue with fine tip

Cricut Explore cutting machine

Cricut spatula and pick tools

Cricut Score tool

Cricut green cutting mat

Ipad to access my Cricut Design Space Account

Triangle Flower Box project from Cricut Design Space

Directions:

I found this project while browsing on the projects pages of Cricut Design Space. Click here to browse the Cricut Design Space project page where this one is located.

 After choosing the customize button on the project page,  I was able to see it on the design project mat.  I chose not to resize the images as they were perfect for a 12 x 12 piece of card stock.  This project calls for the score tool to be inserted into its clamp, so I made sure I did that.

Before sending the image to be cut, I adjusted the Smart Set Dial to Custom as shown in the photo above.   This prompts me on the design space screen to  choose  a custom material setting.  I always choose the "Cardstock, Intricate Cuts 0.27mm" Material setting.  I find this works best for Sabor Papel card stock.  Next, I put the cardstock on the cut mat.  I always use a small piece of removable tape to tape down the corners of the paper to provide extra security that the paper won't shift while cutting. 

Once it is finished cutting, I unload the mat and carefully begin lifting the cut paper.  I always use this spatula and lift the paper all around the edges first, then work my way in toward the middle.

 I use the Cricut pic tool to poke out any left over chads.

This amazing machine already scored the project for me, so all I needed to do was fold on the score lines and burnish with my bone folder.  I love this feature of this machine!!

 I applied liquid glue with a fine tip.   A fine tip is a necessary tool when you have intricate cuts that need to be adhered.

The project also cuts the under layer that you see glued to the box in the photo above.  Continue assembling the box according to the directions and then all you have to do is embellish, if desired.

 I chose to embellish the tabs that close the box with rose cutouts from the Sabor Papel Amor collection Cardstock Cutouts and adhered the sentiment cutout  to the side of the box.

 You can even add one of the Amor Cutouts as a gift tag, if you wish.

I am so please with the way this gift box turned out.  The Amor Collection is perfect for this and many other projects you can find in Cricut Design Space.  This project is so versatile and can be used in so many ways.  Can't you see this as a lovely thank you gift sitting on the table at a wedding, a bridal shower, or a birthday or graduation party?  I hope this post has inspired you to use  your cutting machine and Sabor Papel's beautiful collections to create something gorgeous for your next celebration.  Thank you for visiting the blog today and please leave a comment below.  It really helps my blog and I appreciate you visiting today.

Love and Blessings,

Erminda 

Paper Bead Tutorial with Sabor Papel

Hello and welcome to my blog.   Summer is upon us and warm weather calls for summer dresses, tanks, and of course beaded jewelry.  Today, I have a great technique to use when you have a good supply of scraps of Sabor Papel's beautiful papers.  This fast and easy technique is excellent as a Make N Take or even as a project to use when you have kids you want to keep busy.  

Supplies Needed 

scraps of Sabor Papel papers that measure at least 3 to 6 inches long, cut into triangular shapes as shown

liquid glue

pen or narrow paint brush to wrap paper around

toothpicks, if you desire a smaller bead opening

scissors

Mod Podge, if desired

Paint brush if using Mod Podge

 1.  After you cut the scraps into triangular shapes as shown in the pictures above, spread a bead of glue along the side you want to be the inside of the bead as shown.  In other words the side that will not show.  

 2.  Wrap the paper around the pen as shown and roll the strip onto itself,  keeping it centered as much as possible.  Once you reach the end of the strip, hold it in place for a few seconds to secure.  It dries pretty fast, so once it is secure, slide the paper bead off the pen and there you have it.  A beautiful Sabor Papel paper bead.  

 3.  For a more lustrous finish, you can brush on Mod Podge and allow to dry.

Use these beads as you would any beads.  They look great combined with other beads and jewelry bits from your stash.

I just love the way these beads look when strung together with other jewelry findings.   I can't wait to wear it this summer.  Thank you for visit the blog today and I hope this inspires you to use your scraps to make fun creative projects.  

Love and Blessings,

Erminda

Graduation Cap Gift Box for Sabor Papel

  

 I have a fun technique to share today.  It is a simple  cut, score, fold, and glue project.  Graduation season is in full swing and if you are like I am, you will need some quick grad gifts to give.  This is a cute graduation cap gift box that is perfect for a gift card or a small special gift for the graduate in your family.  The directions are easy and can be used for any size box you will need just by adjusting the dimensions accordingly.  I hope you enjoy it.

          Supplies

1 12 x 12 sheet of Amor Corozonzitos designer paper

Amor card stock cutouts

glue

scissors

paper trimmer

score board

bone folder

twine

1 button

other embellishments

 distress ink, if desired

Directions

 Cut three pieces of paper as shown from the 12 x 12 sheet.  The largest one will be the lid for the box, the middle size will be the bottom of the box, and the smallest will be the mortar board that forms the grad cap once glued to the lid.

 Score the 5 1/2 x 5 1/2 piece at 1 inch on all four sides.

 Score the 5 1/8 x 5 1/8 piece at 3/4 inch all around.

 Fold and burnish all the score lines with the bone folder.

 Cut and miter each corner square on both sheets you scored as shown in the top two photos.  Add glue to the mitered corner and adhere underneath the paper next to it.  Take care to make sure your corner joints are clean and squared as shown in bottom right photo.

Papercrafter's Tip:  Sabor Papel's card stock is 80 pound weight and sometimes even sturdy, good quality paper will crack a bit when folded.  If this happens, I just ink with a coordinating ink to minimize the white sold inner core that may show through.  Here, I used Tim Holtz Distress Ink in Black Soot.  

For the tassle, I wrapped twine around a credit card about 20-25 times.  Then, I tucked a piece of twine under the top of the wrapped twine as shown and tied a double knot.  Next,  I took it off the card and tied a second piece of twine near the top to form the head of the hassle and tied another double knot.  

Finally, I trimmed the fringe to the desired length and glued it to the center of the mortar board piece.  I glued the button to the center to hide the twine ends.

                             Glue the box lid to the center of the mortar board piece (4 3/4 x 4 3/4) and embellish as desired with Amor card stock cutouts and other beautiful embellies from your stash.

   I love the way this gift box came out.  As you can see, a gift card fits in there quite nicely.  I hope this blog post has inspired you to try this easy, yet beautiful gift box technique.  

Thank you for visiting the blog today and please if you could, would you please take a moment to leave a comment?  It is greatly appreciated.  

Love and Blessings,

Erminda